PUSH IT

Shooting film faster than its box speed: what pushing gains, what it costs, the procedure, and every manufacturer push time at 20 °C.

  • 1 Cassette marked with the EI it was shot at
  • 2 +2 = two stops under-exposed → develop longer
  • 3 The push time for that film and EI
  • Studio still life rendered and graded for negativo.es · numbered pins step through what you are looking at.

    UNDER-EXPOSE NOW, DEVELOP LONGER LATER what pushing really is

    Set the meter to a higher exposure index (EI) than the box speed. Each doubling — 400 → 800 → 1600 → 3200 — is one stop less light. Longer development lifts midtones and highlights back up.

    It cannot put detail into shadows that got too little light. Watch the deep-shadow dot fall down the toe of the curve.

    Source: Kodak F-4017 — Tri-X 320 & 400 technical data (2021) · Ilford HP5 Plus — technical information (Harman, 2018)

    HOW TO READ IT A characteristic curve: how dense the negative gets (up) for each scene brightness (right, in stops from mid-grey). Each line is the same 400-speed film rated higher and developed longer; they draw one after another. Illustrative shape. • The dot is a deep shadow, 4 stops under mid-grey. Every push drops it further down the flat 'toe': that detail is lost and no development brings it back. • The upper part gets steeper with each push: more midtone and highlight contrast — that is what the longer development buys.

    PUSH A ROLL, SCENE BY SCENE

    SET THE EI ONCE

  • Pick the EI the light demands: 800, 1600 or 3200 on a 400 film.
  • Set it on the meter or camera before the first frame.
  • Development is the same for every frame: the whole roll must be shot at one EI.

    METER THE SUBJECT, NOT THE LAMPS

  • Read faces or midtones; bright lamps and signs fool the meter into more under-exposure.
  • When in doubt, give a little more exposure.
  • MARK THE CASSETTE

  • Write the EI on the cassette the moment it comes out: HP5 · EI 1600 · +2.
  • DEVELOP LONGER — NOT HOTTER

  • Use the manufacturer's time for the EI you shot (table below).
  • Same 20 °C, same agitation, same stop, fix and wash.
  • AGITATE AS THE DATASHEET SAYS

  • Ilford: 4 inversions in the first 10 s of each minute.
  • Kodak: 5–7 inversions every 30 s.
  • MANUFACTURER PUSH TIMES AT 20 °C

    FILM · DEVELOPER (20 °C)

    EI 400

    EI 800

    EI 1600

    EI 3200

    EI 6400

    EI 12500

    EI 25000

    HP5 Plus · Ilfotec DD-X 1+4

    9:00

    10:00

    13:00

    20:00

    —

    HP5 Plus · ID-11 stock

    7:30

    10:30

    14:00

    —

    HP5 Plus · ID-11 1+1

    13:00

    16:30

    —

    HP5 Plus · Microphen stock

    6:30

    8:00

    11:00

    16:00

    —

    HP5 Plus · Ilfotec HC 1+31

    6:30

    9:30

    14:00

    —

    HP5 Plus · Kodak XTOL stock

    8:00

    11:00

    14:00

    19:00

    —

    HP5 Plus · Kodak HC-110 B

    5:00

    7:30

    11:00

    —

    HP5 Plus · Rodinal 1+50

    11:00

    —

    Tri-X 400 · D-76 stock

    6:45

    —

    9:30

    11:00

    —

    Tri-X 400 · D-76 1+1

    9:45

    —

    13:15

    16:00

    —

    Tri-X 400 · XTOL

    7:00

    —

    9:45

    11:30

    —

    Tri-X 400 · HC-110 B

    3:45

    —

    6:00

    —

    Tri-X 400 · T-Max dev.

    6:00

    —

    8:45

    —

    Delta 3200 · Ilfotec DD-X 1+4

    6:00

    7:00

    8:00

    9:30

    12:30

    17:00

    25:00

    Delta 3200 · ID-11 stock

    7:00

    8:00

    9:30

    10:30

    13:00

    17:00

    —

    Delta 3200 · Microphen stock

    6:00

    7:00

    8:00

    9:00

    12:00

    16:30

    22:00

    "—" means no published time: don't extrapolate. Kodak: Tri-X can be under-exposed one stop with normal processing, so it lists no EI 800 time. Delta 3200 is an ISO 1000 film designed for EI 1600–6400.

    Source: Ilford HP5 Plus — technical information (Harman, 2018) · Kodak F-4017 — Tri-X 320 & 400 technical data (2021) · Ilford Delta 3200 — technical information (Harman, 2025)

    The End

    NEGATIVO.ES · LAB № Field guide

    THE EVIDENCE — SOURCES

  • Ilford HP5 Plus — technical information (Harman, 2018)
  • Kodak F-4017 — Tri-X 320 & 400 technical data (2021)
  • Ilford Delta 3200 — technical information (Harman, 2025)
  • NOTES

  • Times and figures come from the linked manufacturer documents; the sheet packed with your film or kit overrides this page.
  • Values marked "derived" are calculated from those documents.
  • Read each chemical's safety data sheet. Spent fixer carries dissolved silver — take it to a collection point.
  • All artwork generated for negativo.es. Independent site, not affiliated with any brand named.