At f/2.8 the T2 works in program AE and a P lights in the finder: wide open in poor light, then the camera stops down and speeds up together, up to 1/500 at about f/16.
At f/4 to f/16 it is aperture priority : you hold the aperture and the camera picks the speed. Its top speed is lower here and drops as you stop down — around 1/200 at f/4.
At the flash symbols the camera switches to flash, whatever the light.
Set the aperture — the ring on the lens barrel, flash positions first
Viewfinder display — redrawn from the manual; LEDs follow the controls
The chart redraws the manual's “exposure control range chart”. Program endpoints come from the specifications (EV 3–17, 1 s to 1/500, f/2.8–16); the top speeds in aperture priority are read off the printed chart and are approximate.
Power, autofocus and distance on one dial
Turn the dial from OFF to AF and the camera switches on in autofocus. Keep turning into the manual range, ∞ to 0.7 m , and you focus by hand. Set the dial back to OFF when you stop shooting so the shutter can't trip by accident.
Focus is infrared active : it measures what is inside the focus frame. Half-press to focus; the finder shows ● when sharp. In manual, three marks guide you: ◀ focused in front of the subject, ● on it, ▶ behind it.
Use ∞ for distant landscapes — through a window, past nearby branches — where AF might grab the wrong thing. AF also struggles with glass, smoke, shiny car bodies, water, hair and very small objects: focus-lock on something at the same distance instead.
Manual focus — the manual focus range on the dial
Bright behind, dark face
The meter is an external SPD cell beside the lens, averaging the scene. With strong light behind your subject — sky, sea, a window — it underexposes the face. The manual's fix: +0.5 to +2 EV on the compensation dial, in half steps; a ± lights in the finder. Return it to 0 afterwards.
Or use the half-press : it locks exposure and focus together. Meter on the subject, keep the button half-down, recompose, shoot. To lock exposure separately from focus, focus manually first.
Blue — the manual's range for backlight
Without compensation
With compensation
Flashmatic: the aperture follows the distance
Turn the ring to a flash symbol and the T2 fires the flash regardless of the light. Exposure uses the flashmatic method: the AF distance sets the aperture. One symbol adds a red-eye pre-light .
The flash mark blinks while charging (about 3.5 s) and the shutter won't release; when it stays lit, shoot. Sync runs from 1/30 to 1/500.
Names of parts — back open: film guide, DX contacts, manual rewind button
Insert the battery — coin-slot cover, one CR123A
Load it, close it, forget it
DX coding sets the film speed automatically from ISO 25 to 5000; non-DX film is treated as ISO 100 . Loading, advance and rewind are motorised: the camera rewinds itself at the end of the roll and the counter blinks “00”. To rewind mid-roll, press the manual rewind button on the bottom with something blunt — never a needle.
One 3 V CR123A (or DL123A) lithium cell: about 25 rolls of 24 with flash on half the frames. A battery mark in the LCD counter means replace it soon. Cold weakens lithium cells — keep a spare warm in a pocket.