Back

Hasselblad 500C/M

Four modules, one cube

  1. 01 · A CAMERA IN PIECES
  2. The 500C/M body is a cube that holds the mirror and an auxiliary shutter. Everything that touches the picture bolts on: the lens (with its own leaf shutter and diaphragm), the film magazine at the back, the focusing hood on top and the focusing screen beneath it.
  3. Order matters. The body must be fully wound before you take a lens off or put the front cover back. The magazine must come off before the hood or viewfinder can. Tap the marks on the drawing.
  4. Nomenclature — exploded view from the manual

White to white, red to red

  1. 02 · THE GOLDEN RULE
  2. The body and the magazine each have a small window on the right side: white means ready to fire, red means fired. Because the camera and magazine wind together only while attached, they can fall out of step if you swap magazines. The manual's golden rule: the colours must match .
  3. The magazine can only come off with the dark slide in, and the camera won't fire with the slide in. Remove the slide to shoot.
  4. Indicator windows — the four combinations
  5. Try the manual's double exposure: fire, slide in, take off the magazine, wind the camera, put the magazine back, remove the slide — and fire again on the same frame.

Lock the exposure, slide the pair

  1. 03 · EXPOSURE VALUES
  2. On the CF lens the front ring sets the shutter speed (white scale) and the next ring the aperture . Each pair has an exposure value , shown on an orange scale. Press the cross-coupling button and the two rings move together: the EV stays the same while you trade speed for depth of field.
  3. Speeds 1, 1/2 and 1/4 s are marked in red : at these, keep the release pressed until the leaf shutter has closed — let go early and the camera's auxiliary shutter ends the exposure too soon. The green F setting is only for the 2000-series bodies.
  4. CF lens — speeds, apertures, depth-of-field scale, distance

Everything moves before the shutter

  1. 04 · PRE-RELEASE
  2. When you press the release, four things happen in a quick sequence. A focal-plane camera does most of this too, but on the 500C/M a big mirror and two auxiliary blinds are moving in a 6 × 6 box — the slight shake they cause is what the pre-release button removes.
  3. Pre-release runs steps 1–3 in advance; the shutter is left cocked. Pressing the main release then only fires the leaf shutter. The screen goes dark, so frame first — or use a sports finder for moving subjects. For long exposures set B and the time exposure lock to T ; return it to O before winding.

Eight steps, ten turns

  1. 05 · LOADING THE MAGAZINE
  2. Loading — the manual's eight steps
  3. The crescent indicator in the key goes from white to red as the roll is used. The rear film card holder takes the lid of the film box as a reminder of what's loaded.
  4. The square frame is about 3.6 times the area of a 35 mm frame — and you never turn the camera for a vertical. You can crop either way later, or compose square from the start, looking down into the waist-level hood with its flip-up magnifier.
Loading Hasselblad 500C/M…